Is your roof suffering with a broken tile? This is quite a common occurrence. Things such as strong winds and rain, deterioration, or pests are all common causes of a broken roof tile. So, how do you go about fixing a broken roof tile?
Property and construction expert Thomas Goodman at MyJobQuote.co.uk has created this guide on how homeowners can replace a broken roof tile in simple steps. Take a look at the guide below and see just how easy it is to complete this type of work.
How Difficult Is It to Remove and Replace a Roof Tile?
Replacing roof tiles is quite a simple job that doesn’t require many tools. You will simply need a hammer, ladders, a pry bar, and a new roof tile.
When completing this job, you will need to gain access to the roof via a ladder. It is important that this is completed safely. The ladders should be placed on flat, level ground. It’s a good idea to ask someone to hold your ladders and keep them steady for your safety.
It’s quite a hands-on job, so while it’s not essential, it may be worth wearing safety gloves during the process to avoid any possibility of injuring your hands while completing the work.
How to Remove and Replace a Broken Roof Tile
To replace your roof tiles, you will firstly need to remove the old broken roof tiles from the roof to make room for the new tiles.
Removing your roof tiles is quite simple. You simply need to lift away any overlapping tiles that might be holding this broken tile in place. Then, once it’s free, you can lift the broken tile from the roof.
If your tiles are nailed down, you may need to use a pry bar to lift the overlapping pieces and remove the nail before you can push them out of the way to free the broken piece.
Once you have removed the broken tile, you should now have a gap in your roof where you can install your new tile. Place your new roof tile into the gap where the old tile used to be.
Once you have put the new tile in place, you will need to secure it by replacing the overlapping tiles in their correct position. To do this, use a hammer to lift the overlapping tiles slightly, and then you can pull them back into their correct place.
This step is optional. If you would like to secure your roof tiles further, you can nail your new tile into place using a hammer.
Why Is It Important to Replace a Broken Roof Tile?
There are several reasons why it is important to replace a broken roof tile. Firstly, broken roof tiles create an opening for rain and wind to seep into your roof. This can leak into your loft and into your living space. Leaks can cause water damage to your ceilings, walls, and belongings.
Water damage from a leak can weaken the wooden beams and other structural components of your roof. Over time, this can lead to some serious and expensive repairs.
Mould thrives in damp environments. If water is leaking into your roof, it can create the perfect conditions for mould growth. Mould can cause respiratory issues and other health problems.
Additionally, a broken roof tile can detract from the appearance of your home. If you’re planning on selling your home in the future, a damaged roof could lower its kerb appeal and value.
In short, replacing a broken roof tile is a relatively small investment that can help to save you from much bigger headaches and expenses down the line. It’s best to address these issues promptly to prevent any further damage to your home.
Final Thoughts
As you can see, it is quite easy to remove and replace a roof tile yourself as a DIY job. However, if you’re at all in doubt, it may be best to leave it to the professionals. If you do have a broken roof tile on your home, it’s essential to get it fixed quickly to prevent further damage or possible leaks in the home.
